BUILDINGS – Page 6 – DAVE'S DECALS, DETAILS & MODELS

Posted on November 25, 2014March 1, 2015 by Dave

(SOLD) THE BOTTUMS UP BAR AND GRILL

Posted on November 24, 2014May 4, 2015 by Dave

(SOLD) DPM TOWNHOUSE #1

And yet another DPM model, this is a older kit and the dimples in the side show that.

Posted on November 20, 2014March 1, 2015 by Dave

(SOLD) MIDDLETON MILLS FROM RDA

First let me say this kit wasn’t to bad, RDA especially the older one are know for their problems … as for this kit the windows didn’t fit properly and every opening had to be trimmed to get them to fit. the draft edges from the molding were quite large and I used a belt sanding to take it down or I’d likely still be sanding them down today. Additionally there was some, but not a lot of flash that needed trimming.

The directions? What direction? None to speak of but it did come with 2 pages of info on Middleton Mills and a few tips and a link to a webpage that no longer exist, but no directions. Now granted this kit is not rocket science and you really don’t need them for the main structure, but it came with an extra sprue of add on and half of them made no sense at all .. I still have a few on there that I don’t know what they are for. (might try to get a pic up later.)

Anyway I’m giving it about 2.5 out of 5 stars – it could be better, it could be worse.

As far as this build goes I’m not sure if this one is finished yet … I think it still needs a little more done.

Posted on November 9, 2014November 14, 2014 by Dave

NEED DECALS, I’VE GOT THEM … I MAKE THEM

Each of these sheets run about 3.5″x4.5″ to 3.5″x5″ in size they are printed on high quality decal paper with a high end 8 color photographic printer and set with up to 4 coats of Crystal Clear Acrylic. Each set runs $6.50 with $0.75 S/H and with most things the more you buy the more you save … buy 4 sets for $21.50 and $1.00 S/H … more contact me and we’ll talk. Thanks for looking!